10 Ton Porta Power Kit Hydraulic Panel Beating Car Body Dent Frame Repair Tool

1 x Hydraulic Hand Pump / 1 x Hose / 1 x 10-ton Ram / 1 x Spreader Ram / 3 x Extension Tubes / 1 x Male connector
1 x Flat base / 1 x 90 Degree V Base / 1 x Wedge Head / 1 x Spreader Plunger Toe / 1 x Spreader Ram Toe
1 x Flex Head / 1 x Serrated Saddle / 1 x Carry case / 1 x User Manual
 
Item Specifications: 

Color: red 
Size:73cm*40cm*18cm 
N.W.:29kg 
G.W.:31kg 
Load Capacity: 10 tons 
Jack Power Type: Hydraulic 
Max Lifting Height: 130 mm 
Cylinder
Min Height:330 mm 
Working Pressure: 62 Mpa 
Oil Be Filled: 500 g 
 
For Load: 

Maximum load can not exceed the rated capacity. 
The load can not exceed the half of the capacity when all tubes used. 
The extension of the piston can not exceed the stroke. 
 
For Safety: 

Working oil:No 10 
Check the level of oil,if it is not sufficient,please add the same hydraulic oil. 
After using,close the valve with the cover,to keep the oil free from the dust and dirt. 
Before lifting,adjust the jack slowly to make the load coaxial with resnect to jack. 
Tube can not be bent,near to the catting tools and fires,also can not put te weight on it.
 
Note before operation: